Grade 6 Science Fair Project – "Road Salt – Is it the Fastest Way to Melt Icy Roads?"

The purpose of this science fair project is to explore the effect of road salt placed on snowy and icy roads. The freezing point for water is 32 degrees Fahrenheit. At this temperature water freezes into ice. Road salt is placed on snowy and icy roads because the salt causes the ice and snow to melt. The chemistry behind this reaction is that salt lowers the melting point or freezing point of water. The salt acts as foreign particles in the water to help the melting process.

In this science fair project you will simulate sidewalks and roads in icy conditions. You will fill dishes with ice to represent the sidewalks and roads. You will place various materials across the ice cubes to see if and how the ice cubes melt. The various materials include: road salt, fertilizer, calcium chloride, cat litter, and sand.


Road salt and the various other materials will cause the ice to melt

faster than using nothing at all.


Type of material spread on ice

Materials Needed:

  • Six dishes that have dimensions of 9 x 13 inches
  • Freezer available to use during the science fair project
  • Stopwatch
  • Water
  • 12 ounces of road salt
  • 12 ounces of fertilizer
  • 12 ounces of calcium chloride
  • 12 ounces of cat litter
  • 12 ounces of sand
  • Paper
  • Pencil
  • Camera


Complete the following steps for this science fair project:

Setup Step #1:

Pour water into each of the six dishes. Make sure that the water level in each dish is 1 inch.

Setup Step #2:

Place the six dishes in the freezer. Leave the dishes in the freezer until the water has frozen to ice. You may have to leave the dishes in the freezer overnight.

Setup Step #3:

Place each of the six dishes on the floor of your kitchen.

You are now ready to begin the science experiment.


Step #1:

You are going to spread material onto each dish in the following


Dish #1: Do not spread any material across this dish. Leave this

dish as plain ice only.

Dish #2: Spread the 12 ounces of road salt evenly across this dish.

Dish #3: Spread the 12 ounces of fertilizer evenly across this dish.

Dish #4: Spread the 12 ounces of calcium chloride evenly across

this dish.

Dish #5: Spread the 12 ounces of cat litter evenly across this dish.

Dish #6: Spread the 12 ounces of sand evenly across this dish.

Step #2:

Use your stopwatch to determine how long it takes for each

material to melt the ice. Record your observations. Did the road salt melt the ice the quickest? Rank the materials in order from the dish that melted the fastest to the slowest. Do you think that road salt is most effective material to use on icy roads? Why or why not?

Step #3:

You may want to take pictures during the melting process.

Pictures will help you document your observations as well as validate your results and conclusions.

Summary of Results:

The materials that were spread across each dish cause the freezing point to lower. This in effect caused the ice to melt. Road salt is

used on icy roads because it is the most effective and also the safest for the environment.

Tips For Winning a Science Fair Project With a Rock Set

Collecting rocks is a popular hobby that kids and adults can enjoy together. More than just a fun activity, rock collecting is a great way to study rocks and geology. It can also make a great science fair project. This article provides tips on how to win a science fair project with an amazing rock set.

Rock collecting can be done for fun or for learning or both at the same time. Many children return from the beach or park with a pocketful of assorted rocks, drawn to shapes, colors, and textures. Taking a more systematic approach to rock collecting can help kids take their fun to another level while they also discover the underlying geology.

For a science fair project, it’s more impressive if the student has collected many samples in person. It makes for interesting stories to include in the presentation. Photos of the adventure mounted to a foam board or set in a photo album can help tell the story.

To collect your own rock set, you will need to choose a good location for the hunt. Check local geological maps and look for hills, cliffs, beaches, and quarries. Pick up interesting rocks on trips. When collecting in person, label each sample with a number and location to help later identification. If using a rock hammer to collect samples, wear goggles and gloves.

However, not everyone has time to collect their own rock set. The good news is you don’t have to collect your own because you can purchase a rock set containing just about any kind of rocks you could ever find on your own. For many busy families, a store-bought rock set provides a good place to start.

To win a science fair project, your rock set should include examples of all three rock types as listed below. There are three types of rock categorized by formation:

o Igneous

o Sedimentary

o Metamorphic

Igneous rocks form from cooling magma, or molten rock. Volcanic or extrusive rocks result from volcanic activity at the Earth’s surface and fast cooling of lava. The rapid cooling produces fine-grained rocks like obsidian and basalt. Plutonic or intrusive rocks form beneath the surface, from slowly cooled magma. These rocks, like pumice and granite are typically rougher and have larger crystals.

Sedimentary rocks form through deposition in water. Small rock particles are eroded and accumulate in lakes, oceans, and rivers. Over time, these particles settle in layers and compress into rock, such as sandstone, limestone, and chalk.

Metamorphic rocks are igneous or sedimentary rocks that have undergone extreme pressure and temperature conditions, resulting in new forms. Marble forms from limestone, while quartzite develops from quartz.

For a winning science fair project, consider using a rock tumbler to polish some of the samples. Rock tumblers smooth rocks by moving them around in grit and other polishing compounds. Rocks of a similar hardness should be polished together, so first identify and classify samples on the Mohs scale. The process takes about a month, starting with a rough grind to smooth edges and moving to finer grit and polish with each step. Follow all tumbler directions for the best results. Careful recording of the amounts and types of rock, polishing materials, and duration will create an informative science fair project. Note any changes in the tumbler contents or actions taken to improve the process.

All of the tips provided so far are essential for winning a science fair project. However, if you really want to take your project to a higher level, you’ll need to become fluent in speaking rock talk. This is what separates the true rock lovers from the more casual passers-by. You’ll need to dig a bit (no pun intended) into the science of how rocks are formed. Often rocks are made up of several minerals. Once a child knows how rocks and minerals form, finding different types becomes easier. Understanding chemistry is useful. Elements such as carbon, iron, and fluorine are the simplest building blocks of minerals. A specific combination of elements forms a mineral, such as quartz or mica. Minerals have characteristic crystalline structures made up of repeating elements. Kids enjoy identifying minerals with a rock set and tools to test hardness. The systematic approach involves looking at the streak color left by a rock, along with its ability to scratch glass or be scratched by a metal probe. All this extra knowledge will make your science fair project more impressive while building your own knowledge, understanding and appreciation for rocks.

Award Winning Science Fair Projects – Tips to Make Them Look Good

Having an award-winning science fair projects isn’t the reason teachers assign or sponsor a school science fair, but in general winning a prize can be a big motivator for the students. There are several things to consider if you want to be one of the ones that take home a ribbon, but unfortunately the final presentation could make or break you.

It is true in education they preach that it is the process not the product that matters. So for science fair projects the goal is to learn something from the doing the project. Following the directions, using scientific thought and proper steps are all crucial to a successful project and getting an eventual award. However, when the project is being judged, the presentation could make or break you. Award winning science fair projects display boards will be attractive and professional looking.

Here are some tips on how to make an attractive display that judges will respond to.

One: Use color on the science board. You want color but not too much color. Over doing it will work against you. One color scheme is usually good. You can use two if the second is to complement with borders. Hand written reports should be in blue or black ink and anything printed should only be in black. When possible get the color to match the topic. (orange for citrus, green for plants etc)

Two: Formatting of the document should look professional. Use bold fonts, no higher than 14-16 point. Justify the margins. This makes it easy to read, which very important to the judges.

Three: Each section should have bullet points, with dots or arrows only. This is not the time to be cute. You might be able to use theme related bullets in certain situations. Light bulbs for an electricity experiment. Which ever, the same bullet pattern should be used on the entire display board.

Four: If there are pictures, put borders around them. Computer generated borders should be the same on all the papers. Hand made borders should be part of the color pattern. Construction paper as a back drop for a written paper is an effective border.

Five: Use glue instead of tape. You do not want to see tape edges and folded over tape loosed its sticky. Glue sticks are perfect. You can find a glue spray designed for display boards at an office supply store.

Six: Make sure your cutting is even. Use a straight edge to mark your cutting lines. Do a test run on the display board with scrap paper cut to size to see if it fits before cutting your final copies of your data and research.

These tips will not win the award for you, the quality of your project will be the final factor, but without them, your potential award-winning science fair projects will be passed over.